LG 42PW350 - MOTION REMOTE and 3 D SYNC BOARD SECTION; Motion Remote Operation

MOTION REMOTE and 3D SYNC BOARD SECTION
The first time the Motion Remote has it’s batteries installed and pointed at the
Television, the Motion Remote is synchronized with the TV. After that, when
Television,
the
Motion
Remote
is
synchronized
with
the
TV.
After
that,
when
pointing the remote at the TV and pressing the Enter key, a pointer appears
on screen, then by moving the Motion Remote around, the pointer moves
with the movement of the remote. When the pointer is placed over a
selectable button, you can press the center
“
Enter
”
button and active the
selectable
button,
you
can
press
the
center
Enter
button
and
active
the
object. This makes navigation much easier.
You can also adjust the volume, change channels and mute the audio with the
Motion
Remote and it has a convenient
“
Home
”
button for the TV Menu.
Motion
Remote
and
it
has
a
convenient
Home
button
for
the
TV
Menu.
A wrist band can be attached to the remote to avoid dropping and damaging the
remote.
The Motion Remote utilizes a specialized receiver on the Television to receive
the RF signal and this information is then routed to P1302 and on to the
IC101 the BCM IC for pointer positioning and interpretation of the other
functions.
How to Re-register the Magic Motion Remote Control after Registration Failure. Reset the
remote control by pressing and holding both the ENTER and MUTE buttons for 5 seconds.
An LED will blink 3 times indicating the remote is ready for registering.
June 2011 42PW350 Plasma
159
Motion Remote “Magic Remote”
A
KB73295502