LG 42PW350 - Y-SUS 18 V Fuse Information

Y-SUS 18V Fuse Information
Location
Location
FS501
(
18V
)
()
2A/125V
FS501 Protects 18V line (created by D506 and T502). 18V is
used on the Y-SUS and leaves the Y-SUS on P101 pins 28~30 to
the Control Board. Then leaves the Control board on P2 pins
the
Control
Board.
Then
leaves
the
Control
board
on
P2
pins
13~15 and goes to the Z-SUS arriving on P201 pins 1~3.
Diode Check with Board Disconnected.
0.5V Red Lead on Chassis Gnd
1 13V Black Lead on Chassis Gnd
Diode Check with Board Connected.
0.85V Black lead on Chassis Ground.
June 2011 42PW350 Plasma
97
1
.
13V
Black
Lead
on
Chassis
Gnd