20
SuperSign Player
Signage Mode (Video Playback Mode)
If the Media Player is turned on and the operating system is booted completely, SuperSign Player runs automati-
cally. Then SuperSign Player automatically plays its schedule. Signage mode is for playing pre-distributed videos
based on the assigned schedule.
The Signage mode screen is shown below.
SuperSign Player Functions
Attention
● Playback may be slow when more than two full HD videos (H.264, MPEG-2, WMV) or other types of media
are played simultaneously.
● When text is overlapped with more than two videos, this may cause blinking.
● The PowerDVD SE is included in SuperSign Player. If you remove the PowerDVD from SuperSign Player,
quick video play will not be available.
● If you use Transition effects on full-HD pictures or more than two pictures, playback may become slow.
● A change to the Windows Standard Timeline will be applied after SuperSign Player is restarted.
● You can enjoy smoother playback with videos encoded with H.264 or VC-1.
● When SuperSign Player is restarted, ad content is automatically played according to the last transferred
schedule. See SuperSign Manager Schedule for details.
Note
To Next Page
Loading...
