17
Function
Name
Air
Conditioner
Ventilation
Description Note & Option
Electric
Heater
○ ○
A function to enhance the heating
capacity by turning on the electric
heater for heating operation. Available
only during the heating operation.
ON / OFF
Energy
Saving
○
Power-saving cooling is the function to
adjust the desired temperature during
cooling operation to enhance the
comfort of the user and improve the
power-saving performance.
ON / OFF
• It’s only possible when you’re operating with
cooling.
• You cannot set the Power-saving cooling,
Concentration-adding wind, and the Auto custom
wind functions at the same time.
Fan Auto
○ ○
A function to set for the operation of the
indoor unit fan when the indoor unit is
thermal off.
ON / OFF
• When it is set to be ON, the indoor fan works
when the product is working, and when the room
temperature reaches the desired temperature
and the outdoor unit stops, the indoor fan stops
as well.
Comfort
Cooling
○
DX
A function to automatically control the
cooling strength and keep pleasant
feeling without turning off the product
even after the room temperature has
reached the desired temperature.
ON / OFF
• The Comfort power-saving function is available
only when the product is cooling.
Ventilation
Kit
○
A function to set the operation for the
ventilation kit which can be additionally
installed on the indoor unit.
ON / OFF
Cooling
By
Ventilation
○
A function to save energy by using cool
outdoor air when the ventilation product
is interlocked and the cooling operation
is working.
ON / OFF
• The ventilation-interlock power-saving cooling
function can work only when the air conditioner
product is cooling and the ventilation product is
operating.
Air Purify
○ ○
It makes the indoor air clean and
pleasant.
ON / OFF
• The air cleaning function is available only when
the product is operating.
• When connected to the air cleaning-only
model, it can work even when the product is not
working.
Robot
Cleaning
○
A function to automatically clean the
lter using a cleaner on the product
when the air conditioner has been used
for a certain period of time. It can be set
30 seconds after the operation stops.
ON / OFF
To Next Page
Loading...
