28
SETTINGS
Select Settings in the menu.
You can set the general settings, air conditioner / ventilation settings, service settings, and installer settings for the
conguration of the usage environment.
General Settings
Function Description Note & Option
Language
A function to set the language displayed on the
remote controller.
한국어 / English / Español / Français / Italiano /
Deutsch / Русский / Polski / Português / 中文 /
Čeština / Türkçe
Setpoint
Type
You can set the desired temperature setting method
to single or dual.
• Single type: You can set the desired temperature
of only one operating mode.
– If you choose to operate cooling, you can only
set the desired temperature for cooling.
– If you choose to operate heating, you can only
set the desired heating temperature.
• Dual type: You can set the desired temperature of
cooling and heating operation modes at the same
time.
– It is recommended for customers who
are accustomed to using North American
thermostats.
Single / Dual
Temperature
Unit
A function to set the temperature unit displayed on
the remote controller.
Celsius Fahrenheit
0.1 °C / 0.5 °C / 1 °C
The Fahrenheit
temperature unit
operates by receiving the
temperature unit from the
indoor unit.
To Next Page
Loading...
