31
Air Conditioner / Ventilation Settings
Function
Product
Description Option
Air
Conditioner
Ventilation
Vane Angle
Control
○
You can adjust the angle in which
the air blows.
However, if Schedule method:
Commercial is selected, you
can set it in the airow direction
settings menu of the Main
Screen.
All Each Standard
Set the wind
angle of all
vanes in the
product at once.
Individually set
the angle of the
vanes.
Set the wind
angle in the
factory data
reset status.
Elevation
Grill
○
A function to operate the
elevation grill for cleaning the
indoor unit lter.
• Rise: Elevate the elevation grill toward the product.
• Stop: Stop the movement of the elevation grill.
• Fall: Lower the elevation grill toward the floor.
Robot
Cleaning
○
The robot cleaning function is to
allow the cleaner on the product
to automatically clean the lter
when the air conditioner is used
for a certain period of time or
longer. Sets the robot cleaning to
work manually or automatically. It
can be set 30 seconds after the
operation stops.
• Auto: When the cumulative operation time of the
indoor unit has passed 30 hours, the robot cleaning
is conducted automatically.
• Manual: The robot cleaning is conducted manually.
Auto Dry
○
The auto dry function is to
remove mold and humidity by
drying the inside of the indoor
unit when the product is turned
OFF after a cooling operation.
General Model
Auto Dry Operation Time
Selection Available Model
Use
Disabled
Use
Disabled
10 min
30 min
60 minutes
AI Dry
• AI Dry: Automatically control the drying time by
referring to the humidity.
※ It is available only when there is a humidity
sensor.
To Next Page
Loading...
