LG PREMTA201 - Page 29

29
Function Description Note & Option
Screen Saver
A function to adjust the screen off time of the remote
controller and the standby screen brightness.
Screen Saver
Timer
LCD Brightness
In Idle
Content
Off
15 s
30 s
1 min
Off
25 %
50 %
75 %
100 %
Auto
Current status
date & time
weather
• If the Standby Screen Brightness is used at 100%,
the LCD life may be reduced.
• The ‘Auto’ of the Standby Screen Brightness is
activated only in the indoor unit with a human
detection sensor kit.
• When it is set to be 'Auto,’ the wired remote
controller standby screen brightness is controlled
in accordance with the intensity of illumination
detected by the human detection sensor.
• The content set value ‘Weather’ requires
connection to the LG ThinQ app.
Date & Time
A function to set the date and time displayed on the
remote controller.
-
Lock
A function to lock the buttons of the remote
controller for preventing children or any other
person from using the remote controller in an
improper manner.
All lock / Operation lock / Mode lock / Fan speed
lock / Temperature lock / Desired temperature
range lock
System
Reboot
A function to restart the remote controller. -
Humidity
Display
The function to decide whether to display humidity
on the main screen and the standby screen.
ON / OFF
• When it is set to ‘ON,’ the humidity value varies
according to the humidity sensing position
settings (installer settings).
1) Remote controller: Displays the humidity that
remote controller sensed.
2) Indoor unit : Displays the humidity that indoor
unit sensed. However, if no information is
received, humidity is not displayed.
Display
Opposite
Mode
A function to set whether to display the status
where the operation mode selection is unavailable
in accordance with the outdoor unit operation
when the cooling / heating mode is selected in a
product which does not support the cooling / heating
operation at the same time.
ON / OFF