LG PREMTA201 - Page 3

03
WARNING
Installation
• For electrical work, contact the dealer, seller, a qualified electrician, or an authorized service Center.
– Do not disassemble or repair the product. There is risk of fire, electric shock, explosion, equipment malfunction, or injury.
• Request to the service center or installation specialty store when reinstalling the installed product.
– There is risk of fire, electric shock, explosion, equipment malfunction, or injury.
• Do not disassemble, fix, and modify products randomly.
– There is risk of fire, electric shock, explosion, equipment malfunction, or injury.
• The product shall be installed according to the national standards and local code.
• Apply totally enclosed noncombustible conduit in case of local building code requiring plenum.
• Use appropriate unit mounting procedures.
• Avoid direct sunlight.
• Avoid moist areas.
In-Use
• Do not place flammable objects close to the product.
– There is risk of fire, electric shock, explosion, equipment malfunction or injury.
• Do not allow product to get wet.
– There is risk of fire, electric shock, explosion, equipment malfunction or injury.
• Avoid dropping the product.
– There is risk of fire, electric shock, explosion, equipment malfunction or injury.
• If product gets wet, contact your dealer or authorized service center.
– There is risk of fire, electric shock, explosion, equipment malfunction, or injury.
If the instructions are not followed, it may cause death or severe injury of the user.
• Do not use sharp or pointed objects on product.
– There is risk of fire, electric shock, explosion, equipment malfunction or injury.
• Do not touch or pull the lead wire with wet hands.
– There is risk of product breakdown or electric shock.
CAUTION
Installation
• If anyone other than a licensed professional installs, repairs, or alters LG Electronics air conditioning products, the warranty
is voided.
– All costs associated with repair are then the full responsibility of the owner.
• Do not install the unit in potentially explosive atmospheres.
In-Use
• Do not clean using powerful detergents like solvent but use soft cloths.
– There is risk of fire, electric shock, explosion, equipment malfunction or deformation.
• Do not press the screen using powerful pressure.
– There is risk of product break-down or malfunction.