Section 5. Configurations
5-3
a user chooses to mark a record after taking a meas-
urement. See Taking a measurement on page3-3.
Measurement Settings
Measurement Settings control the following aspects
of measurements taken with the LI-600. If the fluoro-
meter option is not available, the fluorometer meas-
urement settings are not be included in the
configuration.
Flow is the flow rate generated by the pump to the leaf
aperture: Low (75), Medium (115), or High (150).
Match Frequency indicates how often a match of the
RH sensors is triggered, specified in minutes. The
default is 10 minutes.
Flash indicates whether the measurements are light or
dark adapted, type of flash, flash intensity, and flash
length in milliseconds.
Fluorescence Constants are Leaf Absorptance (abs)
and Fraction Abs PSII (PS2/1).
Modulation (modrate) is the modulation rate of the
LEDs used to take the fluorescence measurement. The
input Actinic Modulation Rate in Hz is shown with the
automatically calculated Integrated Modulation Intens-
ity.
Display Layout
Display Layout determines the layout of the instru-
ment display. The options include a 2- or 8-panel layout
that displays selected variables after a measurement is
taken.
To Next Page
Loading...
