4-1
Section 4.
Using the computer software
The LI-600 computer software is the interface for man-
aging configurations and data, performing user cal-
ibrations, and for generating custom barcodes. The
software can be used with or without an LI-600 connected.
Download the software and connect the
LI-600
Take the following steps to download the software and
connect the LI-600 to your computer.
1 Install the computer software, which is downloaded at licor.-
com/600software
2
Press and hold the Enter button to power on the LI-600.
3 Connect the LI-600 with your computer using the micro USB
cable.
The LI-600 will automatically connect with the com-
puter software if the computer software and instrument
firmware are up to date. If the software and firmware
are not up to date, the computer software will prompt
you to update.
Connection Overview
Connection Overview is the software startup screen, and
shows the firmware and computer software versions. From
To Next Page
Loading...
