LI-COR LI-600 - Groups, Labels and Descriptions

LI-600 Porometer/Fluorometer Instruction Manual
6-4
sheet application. The example below shows inform-
ation in the fluorometer configuration group.
Figure 6-1. Variables and units in the fluorometer con-
figuration group.
Groups, labels and descriptions
Following is a list of groups and labels in each data file,
and the description for each label. See Flash files on
page6-11 for information on flash files. The tables are
organized as follows.
Group
label Description
System
The System group consists of five parameters for each
measurement. Time and Date are set manually in Set-
tings or synced from GPS (recommended) on the
device. See Settings on page2-6 and Clocks on page9-20.
SYS
Obs# Observation/record number
Time Time of observation: HHMMSS
Date YYYYMMDD
configName Configuration name
configAuthor Configuration author
User Defined
The User Defined group contains the remarks and labels
created in Configuration Management in the com-
puter software. See Remarks on page5-7 and Data Labels