8-1
Section 8.
Maintenance
This section describes typical maintenance procedures for
the LI-600. For many of these procedures, support videos
are available at:
licor.com/env/support/LI-600/videos.html
Storing the LI-600
Follow these guidelines when storing the LI-600.
l
Power down and store it in the carrying case when not
in use; this will keep dust, insects, and other con-
taminants out of the aperture.
l
Store it in a climate-controlled environment.
l
Charge the battery to 60% capacity prior to long-term
storage.
l
Disconnect the power supply.
External Cleaning
These are basic cleaning procedures for the exterior com-
ponents of the LI-600.
Caution: Always turn off the LI-600 before cleaning.
Barcode window and quantum sensor
Regularly check that the barcode window and quantum
sensor are clean, as dirt and debris may accumulate after
To Next Page
