Section 5. Configurations
5-9
Flash sets the fluorometer flash to light (default) or
dark adapted, whether the flash will be rectangular or
multiphase (light-adapted measurements), and sets flash
intensity and flash length.
If the Dark Adapted box is checked or the Rect-
angular or Multiphase Flash options are selected, val-
ues in Flash and Modulation automatically set to
default.
Figure 5-8. Fluorescence Constants and Modulation.
Fluorescence Constants include Leaf Absorptance
and Fraction Abs PSII.
Modulation inputs the Actinic Modulation Rate. Integ-
rated Modulation Intensity is automatically calculated.
Display Layout
In Display Layout, you can customize the layout and
variables that are visible on the LI-600 Measurement
screen.
To Next Page
Loading...
