Description Quantity Part Number
Pump 1 286-17946
Pump O-ring; 16×1.5 mm VITON 75 1 192-18247
Pump O-ring; 29×2 mm VITON 75 1 192-18249
Screws; M3×0.5 20 Stainless Steel 4 151-18159
Hex key; 2.5 mm ball end 1 611-20555
Intake Filter Tool 1 6371-021
Intake O-ring; 14.5×1 mm FKM 75 5 192-09986
Intake Filters 5 6571-002
Table 1-1. Spares and accessories that are included with the LI-710.
Replacement parts
The spares kit included with each LI-710 includes the parts listed in Table 1-1 above.
Additional replacement parts are available for purchase.
Filter pack
Part number
9971-015
Five replacement filters are included in the spares kit. Additional filter packs are
available for purchase. The filter pack includes five filters and five O-rings.
Replacement pump
Part number
9971-016
One replacement pump is included in the spares kit. Additional pumps are available
for purchase. The kit includes one pump, two O-rings, and four screws.
Accessories
The accessories below are available from LI-COR.
Extension cable
Part number
392-20529
25-meter extension cable with weather-resistant connectors on each end. Extends the
data/power cable for a total length of 30 meters.
Crossover fitting
Part number
259-13276
The LI-710 can mount to a horizontal cross bar (1¼" outside diameter) with a ¾" ×
1" crossover fitting.
Section 1. Introduction to the LI-710
1-3Replacement parts
To Next Page
Loading...