LI-COR LI-710 - Section 6. Connecting to the Sutron 9210 datalogger; Requirements for this tutorial

Section 6.
Connecting to the Sutron 9210 datalogger
Figure 6-1. The Sutron 9210 XLite data-
logger can record data from the LI-710.
You can log data from the LI-710 to
Sutron dataloggers that support the SDI-
12 protocol. This tutorial and program
provide the basic steps for accomplishing
this with a Sutron 9210 datalogger. If you
want to add the LI-710 to an existing pro-
gram, the task may be more complicated.
Contact Sutron technical support for assist-
ance.
Requirements for this tutorial
The following items are required to com-
plete this tutorial.
l
LI-710 Evapotranspiration Sensor.
l
Datalogger program for logging
LI-710 data to the 9210. A sample pro-
gram is available from
licor.com/documents/xnr4f3wg9hpnoz9nlc93rw0ntfvvp8vb
l
Personal Computer (Windows OS).
l
Sutron 9210 Datalogger.
l
Xterm for Sutron products (from otthydromet.com).
6-1LI-710 Evapotranspiration Sensor Instruction Manual