Need help?Do you have a question about the LI-COR LI-710 and is the answer not in the manual?
General| Brand | LI-COR |
|---|---|
| Model | LI-710 |
| Category | Security Sensors |
| Language | English |
Explains safety symbols and their meanings for product safety.
Defines the meaning of warning, caution, and note labels within the manual.
Identifies and lists the main components included with the LI-710 sensor.
Describes the core LI-710 sensor, its connectors, and mounting post.
Lists parts available for purchase to maintain the instrument's functionality.
Discusses factors for optimal sensor placement to achieve measurement goals.
Details recommended sensor heights for accurate evapotranspiration measurements over various crops.
Provides instructions on how to physically attach the sensor to mounting hardware.
Explains the correct connection of the LI-710's power and data wires.
Summarizes the basic SDI-12 commands used to interact with the LI-710 sensor.
Outlines the initial configuration and address settings of the LI-710.
Lists the necessary hardware and software for connecting the LI-710 via a translator.
Details the physical connection steps for the LI-710 to a computer using the translator.
Guides users on interacting with the sensor using text-based commands.
Specifies the hardware, software, and datalogger models needed for integration.
Outlines the steps to connect and set up a Campbell Scientific datalogger with the LI-710.
Explains how to download and view data collected by the datalogger.
Lists the necessary hardware and software for connecting the LI-710 to a Sutron datalogger.
Details the process of setting up the Sutron 9210 datalogger for LI-710 data acquisition.
Describes how to extract and save data from the Sutron datalogger.
Defines the primary data output group, including evapotranspiration and diagnostic values.
Explains the data group containing results and the total number of samples used.
Details environmental measurements like humidity and temperature without flux results.
Explains the tiered diagnostic system for identifying instrument issues.
Describes how specific numerical codes indicate potential problems with the LI-710.
Provides guidance on interpreting and resolving diagnostic codes for troubleshooting.
Outlines simple visual checks to ensure the sensor is functioning correctly.
Step-by-step instructions for replacing the air intake filter to maintain airflow.
Details the procedure for replacing the internal air pump component.
To Next Page