Section 10.
Specifications
Temperatures
Storage: -20 – 50 °C up to 85% RH
Operating: +5 – 50 °C up to 85% RH
Humidity: Up to 85% RH
Operating Pressure Range: 50 – 110 kPa
Communication: SDI-12
Power Requirements
Voltage: 9 – 33 VDC
Power: ≤1.5 W nominally
Measurements
H
2
O Mole Fraction Range: 0 – 60 mmol/mol
Inlet Flow Rate: 0.225 lpm (typical)
Installation
Separation Between LI-710s: ≥2 meters
Mounting Height: >2 meters above the plant canopy
Mounting Hardware: 1 inch (2.54 cm) diameter post
Ingress Protection: Tested to IEC IP54
Weight: 1.4 kg
Dimensions: 58 × 17.5 × 7.7 cm (H × L × W)
10-1LI-710 Evapotranspiration Sensor Instruction Manual
To Next Page
Loading...