-240- v2.9
Sensors
7.2.4.2. Connecting the sensor
This sensor have not cable. This sensor send the data wirelessly to MySignals board.
Place a test strip in the machine when the machine is ready. Watch the indicator for placing the blood to the strip.
Once the test strip package is opened, it must be consumed within 3 months.
Figure: Insert strip in the glucometer.
Wait until MySignals program indicate that it is connected with the BLE sensor.
Figure: Ready for measurement glucometer
Clean the end of your index nger with rubbing alcohol before pricking it with an sterile needle or lancet.
NOTE:The needles or lancets are not provided.
To Next Page
