-278- v2.9
Maintenance
12. Maintenance
• In this section, the term “MySignals” encompasses both the MySignals device itself as well as its sensors and
extra components.
• Take care when handling MySignals, do not let it fall, knock it or move it suddenly.
• Avoid having the devices in high temperature areas as it could damage the electronic components.
• The sensors should be connected carefully. Do not force them when plugging in or out them as the connectors
could be damaged.
• Do not use any type of paint on the device, it could harm the operation of the connections and closing
mechanisms. Do not remove the permanent plastic frame which protects the screen.
• Remember that the warranty policy does not allow to open the enclosure or any sensor in any case.
• NEVER submerge the device in any liquid.
• Keep the device in a dry place and away from any liquids that might spill.
To Next Page
