-260- v2.9
Sensors
We introduce another new feature available on bluettoth blood pressure sensor. This screen allows the user to
set the measure interval on blood pressure, this values start from 30 seconds to 1800 seconds. Blood pressure
sensor will start measuring again after this value and it will loop until the user exits from detail screen or turns o
the bluetooth device.
Each time a new value is wrtten, the user should press save button below the text box to save the changes.
When the user go back to main data screen the connection between the application and the bluetooth sensor
stops, then each time the user enters the detail screen for a sampling sensor it is mandatory to establish a new
bluetooth connection as described before.
For a better use of these sensors we recommend to turn o and on the bluetooth sensor before connecting with
the mobile application.
WARNING: WE EXPERIENCED THAT SOME BLUETOOTH CHIPSETS CANNOT CONNECT TO BLUETOOTH SCALE.
SPECIFICALLY, WE FOUND THIS BEHAVIOUR ON BQ DEVICES.
There is one special detail screen, the scale.let's explain the workow:
First of all, a main alert will show up, you can choose between display data already measured and perform a new
measure:
To Next Page
