Light L16 - Page 13

System
Date & time
Set date and time automatically.
1. Access the device settings menu (see above).
2. Tap “Date & time.”
3. Tap the activation switch next to “Automatic date & time” to use network-provided
information.
Set date and time manually.
1. Access the device settings menu (see above).
2. Tap “Date & time.”
3. Make sure the activation switch next to “Automatic date & time” is toggled off.
4. Tap “Set date” to set your camera’s date.
5. Tap “Set time” to set your camera’s time.
Select a time zone.
1. Access the device settings menu (see above).
2. Tap “Date & time.”
3. Tap “Select time zone” to set your camera’s time zone.
Use 24-hour format.
1. Access the device settings menu (see above).
2. Tap “Date & time.”
3. Tap the activation switch next to “Use 24-hour format” to toggle on or off.
About L16 Camera
Check for software updates.
12/67