Double-click or swipe to camera mode. If the Light L16 wakes to the lock screen, double-
click the shutter button or press and swipe up from the camera icon to open the camera
mode.
Charging and battery life
Charge your Light L16. Plug the small end of the included USB-C cable into the USB-C
port on the bottom of your Light L16. Next, plug the opposite end of the cable into the
included power adapter, then plug the adapter into a power outlet.
blue light around the shutter button begins to pulse.
The Light official quick-charger. In the box with your Light L16 is a Light official USB 3.0
Quick Charge adapter. Charging with the Light official adapter ensures a proper and speedy
charge.
Charging statuses. There are three ways the Light L16 can charge:
“Charging Rapidly” appears when using the Light official USB 3.0 Quick Charge
adapter. Charging with this method produces a full charge in around 90 minutes of
time.
“Charging” appears when using a charger that does not support 3.0 Quick Charge.
“Charging Slowly” appears when charging with devices that have restricted power
output. For example, you might see this while connected to your computer.
Note: Power delivery methods from other vendors may not produce desired charging results.
It’s recommended that you always use the provided Light official 3.0 Quick Charge adapter.
If you lose the Light official adapter, contact us
and we’ll help you out!
Turn on or off the battery indicator (device status
). Open the Toolbar , then tap the
gear icon
to open the camera settings menu. Tap the switch next to “device status” to
toggle on or off the battery percentage indicator. Along with battery percentage, toggling
device status on will also show your total images remaining.
Check remaining power. If you do not wish to turn on the battery indicator, swipe down
from the top of the touchscreen to open the Control Center. In the top right corner of the
Control Center, you see a battery icon and percentage remaining.
Preserving battery power.
To Next Page
Loading...