ApexRp Operators Manual
11 248083480-1 Rev 3
Laser Safety Information
This product is considered to be a Class 1 LASER product (as defined
by FDA 21 CFR, §1040.10) when used under normal operation and
maintenance. Performing service on the internal sensor can,
however, result in exposure to invisible radiation.
The particle counter has been evaluated and tested in accordance
with EN 61010-1:2012, “Safety Requirements For Electrical
Equipment for Measurement, Control and Laboratory Use” and IEC
60825-1:2007, “Safety of LASER Products”.
For further technical assistance, contact:
Technical Support Team
800-945-5905 (USA Toll Free)
541-770-5905 (Outside of USA).
controls, adjustments
or procedures other
than those specified
within this manual may
result in personal injury
and/or damage to this
instrument.
WARNING: Attempts by untrained personnel to disassemble, alter, modify
or adjust the electronics or optics may result in personal injury and
damage to the instrument and will void its warranty. There are no user-
serviceable components inside the particle counter. Only factory
authorized service personnel should repair or service this instrument and
its optical system. Review Lighthouse specifications before installing a DC
power supply. Attempting to use under-rated power source equipment
can expose the instrument, adjacent equipment and the user to
dangerous shock and fire hazards. Failure to meet the specifications as
provided by Lighthouse Worldwide Solutions will void the instrument
Warranty and CE certification and may cause serious personal injury.
To Next Page
Loading...
Need help?
General