ApexRp Operators Manual
248083480-1 Rev 3 22
3 Get Started
Unpacking and Initial Inspection
The instrument is thoroughly inspected and tested at the factory and
is ready for use upon receipt. It is presumed that when the
instrument was received, its shipping carton was inspected for
damage. If the carton was damaged, the carrier was notified and the
carton was saved for carrier inspection. The instrument and other
components were then removed from their packing materials and
inspected for broken parts, scratches, dents, or other damage. Any
damage was immediately reported to Lighthouse. Damaged cartons
may be replaced by calling Lighthouse Sales. Keep an undamaged
carton for reshipment of the instrument for its annual
factory calibration.
Identify the ApexRp Model
The ApexRp is available in five models:
ApexR3p 1.0 flow rate, .3µm minimum channel size
ApexR5p 1.0 flow rate, .5µm minimum channel size
ApexR02p 0.1 flow rate, .2µm minimum channel size
ApexR03p 0.1 flow rate, .3µm minimum channel size
ApexR05p 0.1 flow rate, .5µm minimum channel size
Compare Contents
Compare the contents with the pack slip / invoice / parts list. Report
immediately any missing or wrong parts to Lighthouse Support at 1-
800-945-5905 in the USA or 1-541-770-5905 outside of USA.
To Next Page
Loading...
Need help?
General