Line 6 POD GO User Manual

30
Clearing All Assignments
1. From the Bypass Assign screen, press ACTION.
2. Press Knob 2 (Clear All Assign) to clear all block assignments.
The following dialog appears:
Freq
110 Hz
Cancel OK
Clear all assignments?
3. Press Knob 5 (OK).
IMPORTANT! Clearing All Controller Assignments also removes the Wah,
Volume,andanyotherexistingcontrollerassignmentsfromEXP1andEXP2.
Use this function with caution!
Swapping Stomp Footswitches
If you want to change the location of Stomp mode footswitches (especially those with
multiple items assigned), instead of manually reassigning everything, you can quickly
swap all assignments between two stomp footswitches.
1. While in Stomp footswitch mode, press and hold any two
Stomp footswitches until the following dialog appears:
Freq
110 Hz
Cancel OK
Swap footswitch assignments?
2. Press Knob 5 (OK).

Line 6 POD GO Specifications

General

Type	Multi-effects pedal
Effects	Over 270 effects
Amp Models	More than 80 amp models
Cabinet Models	More than 40 cab models
Looper	Yes
Looper Time	Up to 40 seconds
Footswitches	8 footswitches
Inputs	1 x 1/4" (instrument), 1 x 1/4" (aux in)
Outputs	2 x 1/4" (main out), 1 x 1/4" (headphones)
USB	1 x Type B
Dimensions	14.1" x 9.1" x 3.5"
Weight	5.2 lbs
Computer Connectivity	USB
Display	Color LCD
Expression Pedal	Built-in
Power Supply	9V DC power supply
Power Source	9V DC power supply