D9U001AM2-0101_06
11
1.9 Night Bed Illumination
It is possible to equip Image 3 B with undercarriage illumination. The lightning helps the patient or hospital personnel to better ori-
entate in room with lowered or turned off light. The lowered intensity of lightning is set up after turning the bed on.
The bed is equipped with three-phase illumination:
1. Full intensity of illumination
2. Lowered intensity of illumination
3. Illumination is turned off
The lowered intensity of illumination is set up after the bed is turned on.
After pressing the GO button:
► The handset and bed illumination will light up at full intensity.
After elapsing the GO period:
► The illumination intensity of handset will be lowered.
7 minutes after GO period has elapsed:
► The intensity of bed illumination will be lowered.
In the event any button is pressed (Attendant Control Panel, Handset) outside of GO period:
► The bed illumination will light up at full intensity for 10 minutes and after that, the illumination will be lowered.
► Simultaneously, the handset will light up at full intensity for 7 seconds. After that the illumination will be lowered.
Turning off all illumination:
► Press Bed Lights control Button on the Attendant Control Panel and all illumination on the bed (handset and bed illuminati-
on) will be turned off. This function is not blocked by the activation GO button.
To Next Page
Loading...
Need help?
General
