D9U001AM2-0101_06
37
12.2 Handset
The handset is included as a standard feature. The handset is available with and without button illumination. The button illumination
of the illuminated handset is active when the bed is connected to the mains. The functions of both handsets are identical. Where
the handset is to be stored on the bed depends on the patient’s condition.
1. Thighrest Adjustment Button
2. Thighrest/Backrest Lock LED
3. Backrest Adjustment Button
4. Activating GO Button
5. Auto-Contour Button
6. Height Adjustment Button
7. Height Lock LED
8. Flashlight Button
9. Flashlight
Fig. Handset
To switch on the ashlight:
► Press and hold ashlight button 8 and ashlight 9 on the top of the handset will light up.
Set the positions as follows:
► Activate the keypad by pressing the GO button.
► Press and hold the function button until the desired position is reached.
NOTE: Depending on the patient’s condition, the nursing staff decides whether the patient is allowed to adjust the bed’s position.
If required, prevent the patient from adjusting the bed as follows:
► Disable functions.
► Unplug handset (if the bed is equipped with Plug and Play).
NOTE: The handset can be plugged into another LINET® hospital bed with the Plug and Play slot.
To Next Page
Loading...
Need help?
General
