D9U001AM2-0101_0634
12.1 ACP – Attendant Control Panel (nurse controller)
Attendant Control Panel is main control panel of the bed. Nurse controller can be placed in the shelf. We recommend placing ACP
panel on the head board or foot board or hold it in the hands while controlling the bed.
Fig. Attendant Control Panel
1. Lock indicators
2. Lock Buttons for respective functions
3. Thighrest Positioning Buttons
4. Backrest Positioning Buttons
5. Height Adjustment Buttons
6. Auto-Contour Buttons (simultaneous setting of backrest and thighrest)
7. Central STOP button
8. Button Trendelenburg Tilt (mattress support platform tilt only)
9. Button Antitrendelenburg Tilt (mattress support platform tilt only)
10. Button Examination Position
11. Button Extra Low Position
12. Button CPR (Resuscitation) Position
13. Emergency Trendelenburg Position Button
14. Button Cardiac Chair Position
15. Button Mobilisation Position
16. LED Accumulator charge status (only for beds with backup accumulator)
17. LED Mains power
18. Activating GO Button
19. Bed Lights Control Button (ON/OFF)
NOTE: In case that the bed is not equipped with bed light control, button 19 is not on the controller.
To set positions:
► Activate the keypad by pressing the GO button.
► Press and hold corresponding button until required position is reached.
To Next Page
Loading...
Need help?
General
