D9U001ES1-0101_08
13
Additional instructions for correct use:
► Follow the instructions for use carefully.
► Use the bed exclusively if it is in perfect working order.
► If necessary, check the bed functions daily or at each shift change.
► Ensure any user has read and understood this manual completely before operating the product.
► Ensure that the bed is operated exclusively by qualied personnel who have been trained according to the instructions for
use.
► Ensure that the patient (health permitting) has been informed about the operation of the bed and all applicable safety
instructions.
► Move the bed exclusively on even, hard-surfaced oors.
► Replace any damaged parts immediately with original spare parts.
► Ensure that maintenance and installation are performed exclusively by qualied personnel who have been trained by the
manufacturer.
► Before peak loads or unavoidable excess loads (CPR), place Mattress Support Platform in the lowest position.
► Ensure that only one adult patient uses the bed at any time.
► Take care to avoid injuries or squeezing when operating moving parts.
► When using lifting poles or infusion stands, ensure that nothing will be damaged when you move or adjust the bed.
► Brake the castors when the bed is occupied.
► Keep the Mattress Support Platform in the lowest position at any time when the healthcare personnel are not treating the
patient in order to prevent the patient from falling or injuries.
► Ensure that Siderails are operated exclusively by healthcare personnel.
► Never use the bed in areas where there is a hazard of explosion.
► Ensure that parts of the bed intended for movement are not blocked.
► To prevent failures, use exclusively the manufacturer’s original accessories and mattresses.
► Ensure that the stipulated safe working load is not exceeded.
► If the patient‘s condition could lead to an entrapment, leave the mattress support platform in the at position whilst una-
ttended.
► Adjust bed height when transporting the bed in order to facilitate overcoming possible obstacles.
► Do not modify bed and its components without the manufacturer´s approval.
► Use the mattress system exclusively as specied in this manual and in perfect working order.
► Use the mattress system exclusively in its original state and do not modify it in any way.
► Have the mattress system used exclusively by or under supervision of trained and qualied nursing personnel.
► Have the mattress system serviced and installed exclusively by qualied personnel trained and authorised by the manu-
facturer.
► Do not exceed the maximum patient weight limit (see Mechanical Specications).
► Do not use the bed in the case its parts have been removed unless these parts are designed to be removed.
► To avoid injury or crushing, take extra caution when operating any moving parts of the bed.
► When using infusion stands, ensure that nothing will be damaged when you move or adjust the bed.
► Hydraulic units and gas springs cointain an mineral oil. These mineral oils should not get into the sewerage because of
toxicity for water organisms.
To Next Page
Loading...
Need help?
General
