D9U001ES1-0101_0872
16 Maintenance
WARNING!
► Ensure that the castors are locked prior to installation, putting into service, maintenance and deinstallation.
WARNING!
► Have a defective bed repaired immediately.
► If the defect cannot be repaired, do not use the bed.
CAUTION!
Material damage due to incorrect maintenance!
► Ensure that maintenance is performed exclusively by manufacturer´s customer service or by authorised service
personnel certied by the manufacturer.
► If the defect cannot be repaired, do not use the bed.
LINET ® recommends attaching the maintenance plaque to the bed.
16.1 Regular maintenance
► Check regularly movable parts for wear.
► Perform regularly visual check of the product (with delivery note if necessary).
► Ask service department of the manufacturer for addition of the original spare parts if some product parts are missing.
► Ask service department of the manufacturer for replacement of any damaged product parts by the original spare parts.
► Check regularly that all accessories are working properly.
► Replace damaged accessories immediately.
16.2 Spare Parts
The serial label is located on the frame of the mattress support platform. The serial label contains information for claims and orde-
ring replacement parts.
Information about spare parts is available from:
Manufacturer´s customer service
Sales department
16.3
WARNING!
► Ensure that safety technical checks are performed exclusively by manufacturer´s customer service or by authori-
sed service personnel certied by the manufacturer.
► Ensure that the safety technical checks are recorded in the service and maintenance log.
The procedure for performing the safety technical check is stipulated in EN 62353:2014.
NOTE On request, the manufacturer will provide service documentation (e.g. circuit diagrams, component part lists, descriptions,
calibration instructions etc.) for service personnel for the repair of the equipment designated by the manufacturer as repairable by
service personnel.
To Next Page
Loading...
Need help?
General
