EasyManuals Logo
Home>LINET>Medical Equipment>Sprint 100

LINET Sprint 100 Instructions For Use And Technical Description

LINET Sprint 100
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
D9U001ES1-0101_08
55
12.4.2 Routine Cleaning and Disinfection
Cleaning the mattress:
Check mattress cover top for any signs of damage or for liquid ingress.
Replace or repair and completely disinfect mattress cover top if damaged. Also check if the mattress core is not contami-
nated. In case of core contamination, do not use the mattress and dispose the core ecologically.
Leave mattress cover on mattress.
Clean with water with cleaning detergent.
Rinse mattress with cold water.
Let mattress air dry or wipe dry.
Wipe mattress with disinfectant and rinse mattress with cold water.
Let mattress dry or wipe dry.
12.4.3 Complete Cleaning and Disinfection
Cleaning Top/Bottom Cover:
Use standard hospital detergents, Alcohol based cleaners or Quaternary Ammonium based disinfectants. Suitable Chlorine based
cleaners can be used at a concentration of 0,05%. Stronger concentrations of chlorine can be used if required, (up to 0,1%), with a
maximum dwell time of ve minutes followed by rinsing with water and drying thoroughly before use.
After application of a suitable cleaner, the surface should be rinsed with water and dried before use. (Even if the cleaner instruc-
tions say that this is not required). This prevents a build up of chemicals on the mattress surface that could reactivate during use
and a󰀨ect biocompatibility.
Cleaning the mattress:
Check mattress cover top and base for any signs of damage.
Replace or repair and completely disinfect mattress cover top and base if damaged. Also check if the mattress core is not
contaminated. In case of core contamination, do not use the mattress and dispose the core ecologically.
Leave mattress cover on mattress.
Clean with water with cleaning detergent.
Rinse mattress with cold water.
Let mattress air dry or wipe dry.
Wipe mattress with disinfectant.
Rinse mattress with cold water.
Let mattress air dry or wipe dry.

Remove cover.
If machine washing mattress top/base covers, the temperature should be raised during the wash cycle, to 71°C/160° F,
for 3 - 10 minutes, using hospital approved detergents and rinsing agents.
Dry cover in tumble dryer at low temperature.
NOTE Maximum wash temperature 75°C (but it decreases lifetime period of the product).
12.4.4 Mattress Core
The entire core of the mattress does not require any major cleaning. The core does not need disinfection. Once a month it is
recommended to ventilate the mattress core (remove the mattress cover and leave the mattress core on ventilated area for 12 -24
hours). The mattress core cannot be washed by water or by disinfection.

Table of Contents

Other manuals for LINET Sprint 100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LINET Sprint 100 and is the answer not in the manual?

LINET Sprint 100 Specifications

General IconGeneral
BrandLINET
ModelSprint 100
CategoryMedical Equipment
LanguageEnglish

Related product manuals