D9U001ES1-0101_08
21
9 Putting into Service
WARNING!
► Ensure that the castors are locked prior to putting into service and maintenance.
CAUTION!
Material damage due to incorrect putting into service!
► Ensure that putting into service is performed exclusively by manufacturer´s customer service or trained hospital
personnel.
CAUTION!
Material damage due to incorrect use!
► Do not use pedals for lifting or lowering if the bed undercarriage is not in horizontal position!
NOTE For safe, easy handling, LINET ® recommends having two technicians assemble the bed.
► Unpack the bed.
► Check the delivery (see Scope of Delivery and Bed Variants).
► Ensure that all of the required mechanisms are available on site.
► Raise siderails up.
► Install accessories.
► Set up the bed exclusively on a suitable oor surface (see Transport).
HOOKS ON THE ACCESSORY RAIL (optional)
If the bed is equipped with accessory rail on the head end / foot end hooks on the accessory rail are delivered in the safety position.
In order to use the hooks remove them and place them on the accessory rail from the outer side (reversely).
Fig. Hooks in original position
To Next Page
Loading...
Need help?
General
