D9U001ES1-0101_08
69
14 Cleaning/Disinfection
WARNING!
► Ensure pedals will not be pressed accidentally during cleaning.
WARNING!
CAUTION!
Material damage due to incorrect cleaning/disinfection!
► Do not use washing tunnels to clean the bed.
► Do not use pressure or steam cleaners.
► Follow the instructions and observe the dosages recommended by the manufacturer.
► Ensure that disinfectants are selected and applied exclusively by qualied hygiene experts.
► Respect used materials during cleaning and desinfection! For information see the following table.
►
BED COMPONENTS THAT ARE
INTENDED TO BE CLEANED
in this column!
MATERIALS (SURFACES OF THE MENTIONED BED COMPONENTS)
Bed ends (Head end and Foot end) Polypropylene (PP) + Lacquered steel
Siderails Polypropylene (PP) + Lacquered steel
Mattress support platform cover
(Backrest)
High Pressure Laminate (HPL)
Mattress support platform cover
(Thighrest/Foot section)
High Pressure Laminate (HPL)
Mattress support platform cover
(Calfrest)
only Sprint 100 with 4-part mattress support platform: High Pressure Laminate (HPL)
Seat section only Sprint 100 with 4-part mattress support platform: High Pressure Laminate (HPL)
Castors Polypropylene (PP)
Castor control levers, lifting levers
with pedals, lowering levers with
pedals
Polyamide (PA6) + Lacquered steel
Frame of the mattress support plat-
form
Lacquered steel
Column covers Polypropylene (PP)
Undercarriage cover Acrylonitrile butadiene styrene (ABS)
Corner covers Polypropylene (PP)
Covers of mattress support platform
sides
Polypropylene (PP)
Corner bumpers Polypropylene (PP)
Labels BO319-transfer PET white top / S8002 / HF140 with lamination PP20 matt transparent
Accessory rails Lacquered steel + Stainless steel
Fixed handles, Foldable handles Lacquered steel
Foldable infusion stands Lacquered steel + Stainless steel + Polypropylene (PP)
To Next Page
Loading...
