D9U001ES1-0101_0870
For safe and gentle cleaning:
► Do not use any strong acids or bases (optimum pH range 6 - 8).
► Exclusively use detergents that are suitable for cleaning medical equipment.
► Do not use abrasive powders, steel wool, or other materials and cleaning agents that might damage the mattress replace
ment system.
► Never use any corrosive or caustic detergents.
► Never use detergents that deposit calcium carbonate.
► Never use detergents with solvents that might aect the structure and consistency of the plastics (benzene, toluene,
acetone, etc.).
► Observe local directives regarding infection control.
► Make sure any cleaning agent used is approved by:
the facility in which the mattress replacement system is to be used.
by the environmental protection agency of the country in which the mattress replacement system is to be used.
14.1 Cleaning (Sprint 100)
► Put the Mattress Support Platform in the highest position.
► Adjust the Backrest and Thighrest/Foot section so that the reverse sides are accessible.
► Move the bed to the location where it will be cleaned.
► Lock the brakes on the bed.
14.1.1 Cleaning before Changing Patients
All control elements for adjusting the bed
All handles
Bed ends
Siderails (in highest position)
Freely accessible mattress surface
Accessory rails
14.1.2 Daily Cleaning
All control elements for adjusting the bed
All handles
Bed ends
Siderails (in highest position)
Freely accessible mattress surface
Accessory rails
All Mattress Support Platform covers
Plastic undercarriage covers
Column covers
Mattress on all sides
Freely accessible metal parts of Mattress Support Platform
Infusion stand sleeve tting
Bumpers
Castors
Brakes
To Next Page
Loading...
Need help?
General
