9
o
Solid amber Weak connection to the router. Find an outlet closer to
your router.
o
Blinking amber Not connected to the router. Find an outlet closer to
you router.
7. Connect your Wi -Fi devices to the extended network you just created.
If you have setup your range extender with a Linksys Max -Stream Router, you don’t have
to do anything. Max -Stream routers support seamless roaming, and your extended Wi -Fi
network shares the same network name and password. Connected devices will select the
main or extended network as you move around the coverage area.
If you do not have a router with seamless roaming, select the extended network on your
device's Wi -Fi manager. Extended networks are identied by "_Ext" added to the end of
your main network name(s). Password(s) will be the same as those for your main
network(s).
Note —To
learn more about seamless roaming and see a list of supported devices visit
www.linksys.com/seamless -ro aming.
Your range extender is now set up. Enjoy your extended Wi -Fi coverage.
Browser -based setup
Use this setup method if you don’t have a WPS button on your router , or if you don’t
want to use WPS to set up your RE7000 .
1. Plug in the range extender
Plug in the range extender midway between your router and the area without Wi -Fi. Using
your mobile device or laptop, be sure you have at least two bars (around 50%) of your
router’s Wi -Fi signal at that location. If you don’t have two bars, move the range ext ender
closer to the router. You can move the range extender to an ideal location later using the
setup software.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
