Need help?Do you have a question about the Linksys SLM224G2 and is the answer not in the manual?
General| Switching Capacity | 48 Gbps |
|---|---|
| Forwarding Rate | 35.7 Mpps |
| MAC Address Table Size | 8K entries |
| Jumbo Frame Support | Yes |
| Dimensions | 440 x 203 x 44 mm |
| Features | VLAN support, QoS, IGMP snooping |
| Management | Web-based, SNMP |
| Weight | 5.07 lbs (2.3 kg) |
Covers desktop and rack-mount placement, and step-by-step hardware connection for devices.
Details various console commands for managing statistics, firmware, network settings, ports, and system status.
Configuring port speed, duplex, flow control, and interface settings for network connectivity.
Setting up Link Aggregation Groups (LAG) and configuring LACP for increased bandwidth.
Creating and managing VLANs and configuring port assignments.
Assigning ports to VLANs and introduction to network traffic statistics.
Information on 802.1X EAP packets and configuring RADIUS servers for authentication.
Enabling and configuring 802.1X port-based access control for network security.
Configuring IP access lists and storm control to manage network access and prevent traffic floods.
Securing ports with MAC addresses and an introduction to Quality of Service (QoS).
Configuring Class of Service (CoS) priority mappings and queue servicing methods.
Monitoring traffic, testing cable quality, and saving/loading switch configurations.
Upgrading firmware, rebooting the switch, and testing network connectivity with ping.
To Next Page
