Linksys SLM224G2

Chapter 5
Advanced Configuration
38
24-Port 10/100 + 2-Port 10/100/1000 Gigabit Advanced Smart Switch with 2 Combo SFPs
Enter the Host IP Address of the device you want to ping,
then click Ping.
Admin > Server Logs
Allows you configure the logging of messages that are
sent to remote Syslog servers.
Admin > Server Logs
Name Define a name for identifying this Syslog server.
IP Address IP Address of the Syslog server.
Port UDP port of the Syslog server.
Facility The Facility value to be used when logs are
recorded in the remote server.
Click Add to add the Syslog Server.
Admin > Memory Logs
The Memory Log screen contains all system logs in a
chronological order that are saved in RAM (Cache).
Admin > Memory Logs
No. Displays the log number.
Index Indicates the global sequence number for the log.
Level Indicates the severity of the log.
Category Indicates the category which the log belongs
to.
Time Displays the time at which the log was generated
Message Displays the log message text.
Admin > Flash Logs
The Flash Log screen contains information about log
entries saved to the Log File in Flash, including the time
the log was generated, the log severity, and a description
of the log message.
Admin > Flash Logs
No. Displays the log number.
Index Indicates the global sequence number for the log.
Level Indicates the severity of the log.
Category Indicates the category which the log belongs
to.
Time Displays the time at which the log was generated
Message Displays the log message text.