Linksys SLM224G2

Chapter 5
Advanced Configuration
15
24-Port 10/100 + 2-Port 10/100/1000 Gigabit Advanced Smart Switch with 2 Combo SFPs
PVID (Port VLAN Identifier) VLAN ID assigned to
untagged frames received on the interface. (Default: 1)
Protected Port Click the check box to indicate the
selected ports as protected ports. Ports in the same
VLAN can forward traffic to each other. By enabling the
Protected Port feature on selected ports, Protected Ports
cannot forward traffic to each other in the same VLAN.
Click Save Settings to save the changes.
VLAN Management > Ports to VLAN
Use the Ports to VLAN screen to configure port members
for the selected VLAN index. Assign ports as tagged if
they are connected to 802.1Q VLAN compliant devices,
or untagged if they are not connected to any VLAN-aware
devices.
VLAN Management > Ports to VLAN
VLAN Select a VLAN index to configure the port
member.
Exclude The interface is forbidden from joining the
VLAN.
Untagged The interface is a member of the VLAN. All
packets transmitted by the port will be untagged, that
is, not carry a tag and therefore not carry VLAN or CoS
information.
NOTE: An interface must be assigned to at least
one group as an untagged port.
Tagged The interface is a member of the VLAN.
All packets transmitted by the port will be tagged,
that is, carry a tag and therefore carry VLAN or CoS
information.
Click Save Settings to save the changes.
•
•
•
VLAN Management > VLAN to Ports
VLAN Management > VLAN to Ports
Use the VLAN to Ports screen to assign VLAN group to the
selected interface.
Port Select a Port to assign a VLAN group.
Exclude The interface is forbidden from joining the
VLAN.
Untagged The interface is a member of the VLAN. All
packets transmitted by the port will be untagged, that
is, not carry a tag and therefore not carry VLAN or CoS
information.
NOTE: An interface must be assigned to at least
one group as an untagged port.
Tagged The interface is a member of the VLAN.
All packets transmitted by the port will be tagged,
that is, carry a tag and therefore carry VLAN or CoS
information.
Click Save Settings to save the changes.
Statistics
You can display standard statistics on network traffic from
the Interfaces Group and Ethernet-like MIBs, as well as a
detailed breakdown of traffic based on the RMON MIB.
Interfaces and Ethernet-like statistics display errors on the
traffic passing through each port.
•
•
•
•