Linksys SLM224G2

Chapter 5
Advanced Configuration
33
24-Port 10/100 + 2-Port 10/100/1000 Gigabit Advanced Smart Switch with 2 Combo SFPs
SNMP > Communities
SNMP > Communities
Community ID Select the Community ID number you
would like to configure from the pull-down window.
Create Community Use this button to add a new SNMP
Community.
Community ID Click on the Community ID to edit or
remove the SNMP Community.
Community String Displays the community string of the
SNMP Community.
Remote Station IP Displays the management IP address
of the SNMP Community.
Group Name Displays the group name to which the
SNMP Community belongs to.
SNMP > Communities > Add SNMP Community
SNMP Community (Create Community)
Community String Indicates the Community String of
the SNMP Community.
Remote Station IP Indicates the management IP address
of the SNMP Community
Group Name Indicates the group name to which the
SNMP Community belongs to.
SNMP > Notification Settings
SNMP > Notification Settings
Trap Station ID Select the Trap Station ID number you
would like to configure from the pull-down window.
Create Trap Station Use this button to create a new
SNMP Trap Station.
Trap Station ID Click on Trap Station ID to edit or remove
SNMP Trap Station.
Remote IP Address Displays the IP address to which the
traps are sent.
Community String Displays the community string of the
SNMP Trap Station.
Boot Up Trap Indicates if WarmStart and ColdStart traps
are sent.
Link Change Trap Indicates if LinkUp and LinkDown
traps are sent.
Version Indicates the SNMP version of the trap.
SNMP > Notification Settings > Add SNMP Trap Station
SNMP Trap Station (Create Trap Station)
Remote IP Address Indicates the IP address to which the
traps are sent.