Linksys SLM224G2

Chapter 5
Advanced Configuration
32
24-Port 10/100 + 2-Port 10/100/1000 Gigabit Advanced Smart Switch with 2 Combo SFPs
Group ID Select the Group ID number you would like to
configure from the pull-down window.
Create New Group Use this button to create a new SNMP
group.
Group ID Displays the group ID to which access control
rules is applied.
Group Name Displays the user-defined group to which
access control rules are applied.
SNMP Version The SNMP version of the SNMP group to
which the user is assigned.
Access Displays the group access rights.
SNMP > Group Profile > Create New Group
Create New Group
Group Name Defines the user group to which access
control rules are applied.
SNMP Version Defines the SNMP version attached to the
group. The possible field values are:
SNMPv1 SNMPv1 is defined for the group.
SNMPv2c SNMPv2c is defined for the group.
Access Read This options enables/disables management
access to read-only.
Access Write This options enables/disables management
access to write-only.
SNMP > Group Membership
The Group Membership screen provides information
for assigning SNMP access control privileges to SNMP
groups.
•
•
SNMP > Group Membership
User ID Select the User ID number you would like to
configure from the pull-down window.
Create New User Use this button to create a new SNMP
user.
User ID Click on the User ID to change settings of the
SNMP group membership.
User Name Displays the name of the user.
Group Name Displays the SNMP Group name to which
the user belongs to.
SNMP Version Displays the SNMP version of the user.
SNMP > Group Membership > Add SNMP User
SNMP User (Create New User)
User Name Defines the user name of the group
membership.
Group Name Defines the group name to which the user
belongs to.
SNMP Version Defines the SNMP version of the user.
SNMPv1 SNMPv1 is defined for the user.
SNMPv2c SNMPv2c is defined for the user.
•
•