Chapter 5
Advanced Configuration
14
24-Port 10/100 + 2-Port 10/100/1000 Gigabit Advanced Smart Switch with 2 Combo SFPs
Port Indicates the port number to which admin key and
priority value are assigned.
Priority Displays the LACP priority value for the port.
Admin Key A channel will only be formed between ports
having the same admin key. This only applies to ports
located on the same switch.
LAG ID Displays the LAG ID to which the port belongs to.
LAG Type Displays the LAG Type.
LACP Status Displays the LACP Status.
LACP Properties
You can click on the port number to change the LACP
properties on each port.
Click Save Settings to save the changes.
VLAN Management
A VLAN is a group of ports that can be located anywhere
in the network, but communicate as though they belong
to the same physical segment.
VLANs help to simplify network management by allowing
you to move devices to a new VLAN without having
to change any physical connections. VLANs can be
easily organized to reflect departmental groups (such
as Marketing or R&D), usage groups (such as e-mail), or
multicast groups (used for multimedia applications such
as videoconferencing). You can create up to 256 VLANs on
the Switch.
VLAN Management > Create VLAN
Create VLAN
VLAN Management > Create VLAN
Single VLAN
To create a single VLAN, enter the VLAN ID and VLAN
Name, up to 32 characters long, and click Add.
VLAN ID ID of configured VLAN (1-4094, no leading
zeroes).
VLAN Name Name of the VLAN. (1 to 32 characters)
VLAN Range
To create a range of VLANs, enter the range of the VLAN
IDs to be created in to the VLAN Range fields and then click
Add Range.
To remove a VLAN or a range of VLANs, select the VLANs in
the VLAN list, then click Remove.
VLAN Management > Port Settings
VLAN Management > Port Settings
You can configure the VLAN identifier (PVID), and change
protected port setting for each interface on this screen.
Port ID Displays the port number.
To Next Page
Loading...
