Linksys SLM224G2

Chapter 5
Advanced Configuration
19
24-Port 10/100 + 2-Port 10/100/1000 Gigabit Advanced Smart Switch with 2 Combo SFPs
Click Save Settings to save the changes.
Statistics > 802.1X Statistics
The 802.1X Statistics screen contains information about
EAP packets received on a specific port.
Statistics > 802.1X Statistics
Port No. Indicates the port number, which is polled for
statistics.
Session Octet Received The number of octets received
in user data frames on this port during the session.
Session Octet Transmitted The number of octets
transmitted in user data frames on this port during the
session.
Session Time Displays the duration time of the session
in seconds.
Session Terminate Cause The reason causes session
termination. The possible field values are:
Supplicant Logoff (1)
Port Failure (2)
Supplicant Restart (3)
Reauthentication Failure (4)
AuthControlledPortControl set to
ForceUnauthorized (5)
Port Re-initialization (6)
Port Administratively Disabled (7)
Not Terminated Yet (999)
Session User Name
The user name representing the
identity of the supplicant.
•
•
•
•
•
•
•
•
Security
Security > RADIUS Settings
Remote Authorization Dial-In User Service (RADIUS)
servers provide additional security for networks. RADIUS
servers provide a centralized authentication method for
web access.
Security > RADIUS Settings
Server IP Address Enter the IP address of the server.
UDP Port Number Enter the UDP Port of the server. The
UDP port is used to verify the RADIUS server authentication.
(Default: 1812)
Key String Enter the secret key string as defined on
the RADIUS server. The secret key string is used for
authenticating and encrypting communications between
the device and the RADIUS server.
Click Save Settings to save the changes.