17
ROUTING LCR-II DATA AND POWER CABLES
Data and Power Cable
The LCR-II shipment typically includes a gray 40' power
During
installation, follow these guidelines and ensure the
cables remain undamaged.
Guidelines for routing the data and power cables
on the outside of the truck
automotive plastic corrugated split loom or through
pass through the cab wall, meter box, etc.
re-installing.
proper tool for stripping off the insulation on the cables.
Instructions for hooking up
power to the printer and the
LCR-II begin on pg. 29.
Guidelines for routing the data and power cables
inside the cab
cables before beginning.
vehicle components.
locations where they may be vulnerable to damage.
cables can be easily connected.
the cable.
Routing LCR-II Data and Power Cables
ETVC Kit
Solenoid
Valve
LectroCount
LCR-II
Conduit or
Split
Printer
Data Cable
Printer
Printer
Power Cable
LCR-II
Power Cable
Fuse Panel
(Accessory)
7.5A In-Line Fuse
To Next Page
Loading...
