LiteOn ISA-7-040-S1 - Page 131

Lite-On Technology Corp.
Industrial Automation
131
PC-08
DI8
The function planning for Pin DI8 of the digital
input
Communication
address:
0210H
0211H
Initial value
Based on the control mode
Control mode
ALL
Unit
N/A
Configuration range
0 ~ 0x12D
Data size
16bit
Data format
Hex
Refer to the description for PC-01.
PC-09
DI9
The function planning for Pin DI9 of the digital
input
Communication
address:
0212H
0213H
Initial value
Based on the control mode
Control mode
ALL
Unit
N/A
Configuration range
0 ~ 0x12D
Data size
16bit
Data format
Hex
Refer to the description for PC-01.
PC-10
DO1
Function planning for Pin DO1 of the digital
output
Communication
address:
0214H
0215H
Initial value
Based on the control mode
Control mode
ALL
Unit
N/A
Configuration range
0 ~ 0x10F
Data size
16bit
Data format
Hex
□□□■■: Selection of the input function
□□■□□: Attribute of the input contact
 Selection of the input function: Refer to "Table for definitions of the default DO output" for the function this
selection represents.
 Attribute of the input contact: The attribute is Contact a or b.
0: The input contact is set as NC Contact b.
1: The input contact is set as NO Contact a.
After modifying the parameter, restart the power supply to ensure that the function is in normal