Lite-On Technology Corp.
Industrial Automation
96
Parameters for the planning of the digital I/O pin and for the setting related to the output
Confirmation of the range when the
position is reached
The time for response filtering of the
digital input
The function planning for Pin DI1 of the
digital input
Function planning for Pin DI2 of the
digital input
Function planning for Pin DI3 of the
digital input
Function planning for Pin DI4 of the
digital input
Function planning for Pin DI5 of the
digital input
Function planning for Pin DI6 of the
digital input
Function planning for Pin DI7 of the
digital input
Function planning for Pin DI8 of the
digital input
Function planning for Pin DI9 of the
digital input
Function planning for Pin DO1 of the
digital output
Function planning for Pin DO2 of the
digital output
Function planning for Pin DO3 of the
digital output
Function planning for Pin DO4 of the
digital output
Function planning for Pin DO5 of the
digital output
Function planning for Pin DO6 of the
digital output
The turn-on delay time for the
electromagnetic brake
The turn-off delay time for the
electromagnetic brake
The level for detection of the speed
comparison
The output level for the expected overload
The level for the detection of the target
rotation speed
This indicates the read-only register, which can only be used for reading status values.