CHAPTER 3: SETTING INTO OPERATION 3-7
ALPHA 552
3. SAFETY ANALYSIS FOR THE CORRECT INCORPORATION
Before considering assembling the machine, it is necessary to consider the following points:
• Consider safety strategies that reduce risks to an acceptable level;
• Define the tasks required for applications to predict and assess the need of access and / or for
the approach;
• Identify sources of risks, including failures and failure modes associated with each task. Risks
can come from:
o machine in which the device ALPHA 552 is integrated;
o its association with other equipment,
o People’s interaction with the machine.
• Evaluate and assess the risks associated by using the machine ALPHA 552:
o programming risks
o operation risks
o risks of use
o maintenance risks
• Choose methods of protection :
o the use of protective devices
o the introduction of signals
o compliance with safe work procedures
Once the barfeed system has been aligned and anchored to the ground, the barfeeder must be
connected to the interface of the lathe and compressed air needs to be connected. At this stage, the
hydraulic tank may be filled.
To Next Page
Loading...
