CHAPTER 3: SETTING INTO OPERATION 3-15
QUICK LOAD SERVO III MI
2.7. Security analysis for the correct incorporation
Before considering assembling the machine, it is necessary to consider the following points:
• Consider security strategies that reduce risks to an acceptable level;
• Define the tasks required for applications to predict and assess the need of access and / or for
the approach;
• Identify sources of risks, including failures and failure modes associated with each task. Risks
can come from:
o machine in which the device QLS III is integrated;
o its association with other equipment,
o People’s interaction with the machine.
• Evaluate and assess the risks associated by using the machine QLS III MI:
o programming risks
o operation risks
o risks of use
o maintenance risks
• Choose methods of protection :
o the use of protective devices
o the introduction of signals
o compliance with safe work procedures
3. ELECTRICAL CONNECTIONS
See CHAPTER 4: ELECTRICS, section 4. INTERFACE.
4. PNEUMATICAL CONNECTIONS
See CHAPTER 5: PNEUMATICS, section 2. AIR FILTERING UNIT.
To Next Page
Loading...
