Logosol M7 - Accessories

Accessories
Logosol offers a great range of extensions, special tools and other accessories for the M7 sawmill. Simple
extensions can be bought in 0.5 or 1 m lengths (1.6 – 3.2 ft). It is possible to extend the M7 both at the ends
and in the middle. In the latter case, the log beds would be moved apart, a great advantage for logs exceeding
5.5 m (18 ft). You can also extend the machine with one or more 2 m (6.5 ft) extensions, plus an extra log bed
so that logs around 8 m (26 ft) or longer are to be sawn. The product catalog is available at no cost. Just
order it.
Cutting equipment Article number
To Stihl 064 / 066 / E4000 / E5000 / E8000:
Guide bar - 16” (40 cm), 1.3 picco 3003-025-0040
Ripping chain for guide bar above, 60 DL 3999-000-0060
Guide bar - 25” (63 cm), 1.3 picco 3003-025-0063
Ripping chain for guide bar above, 84 DL 3999-000-0084
To Stihl 064 / 066:
Chain drive sprocket, picco 1122-640-2006
To E 5000:
Star drive, picco 1207-642-1310
Bar nose steering, for chainsaw 6605-000-0205
Bar nose steering, for Logosol’s electric saw unit 6605-000-0200
Water cooling for the cutting equipment on Logosol’s
electric saw unit 6605-000-0100
Filing equipment
File vice to hold the chain steady while ling 9999-000-0620
Pferd le gauge 4.8 mm (0.2”), les cutter and drive link together 9999-000-0410
Round le 4.8 mm (0.2”) for Pferd le gauge 9999-000-0411
Manual electric chain grinder 9999-000-1525
Automatic sharpening robot 9999-000-1515
Extensions
End extension 0.5 m (1.6 ft) 4507-000-0600
Mid extension 0.5 m (1.6 ft) 4507-000-0500
End extension 1.0 m* (3.2 ft) 4507-000-0800
Support leg* with adjustable foot 6600-000-3001
Half M7 sawmill 2.0 m (6.5 ft) 4507-000-2000
Aids
Measuring rod to check saw height setting 4507-001-1300
Ramp mount to fasten a 2x5” in the knee joint 4507-001-1304
Log steps to load logs over 20” (50 cm), 2 items 4507-001-1302
Stop plate with spring-loaded arm 4507-001-1025
Loading ramp to simplify control of saw on an M7 9999-000-0920
Accessory for rounding logs, saws 16 sides 9999-000-1100
Adjustable log support, a universal tool 4510-720-6104
X 550 articulated support for holding thin logs 4500-070-1000
Log roller, to move logs sideways 9999-000-1420
Log boss, for handling heavy logs 9999-000-0561
Log turner, helps you rotate the log 9999-000-2702
Hearing protection with face shield 7001-884-2233
Folding rule 2 m, Logosol, with millimeter and inch scales 9922-130-0000
Cap, Logosol 9922-120-0000
Electric sawing unit
E 5000, high capacity 3-phase saw, incl. support leg 6601-000-0005
Feed for E 5000, stepless in both directions 6600-000-1000
Bandsaw, 3-phase, with 350 mm (13.8”) opening 9999-000-7500
Moulders
Electric log moulder, 3-phase 7600-000-0230
Log moulder powered by chain-saw 7700-000-0230
Logosol SH230 planer, dimensioner and moulder 7202-000-0230
* Guide rail support legs should be used if the M7 is extended more than 0.5 m (1.6 ft) on one
side using the extensions above or if an electric saw, log moulder is used.
Guide bars adapted for
sawmills.
Create beautiful posts with the
round sawing attachments.
The log turner makes it
easier to handle logs.
With ramp mounts
you can fasten a
plank to the sawmill’s
knee joint.
37