www.longer3d.com support@longer.net
Fiberglass is made from two materials: glass and epoxy resin. The
best method of marking glass is etching while epoxy resin can
emit toxic fumes upon laser engraving. These two reasons make
fiberglass a bad choice for a laser engraving material
polypropylene melts and catches on fire easily and then the
melted material continues to burn thereby forming pebble-like
drips that harden on the surface
Coated carbon fiber emits noxious fumes. Additionally, carbon
fiber can be cut
albeit with some fraying but this is not the case when it is coated.
(9)The Nano has built in technology and algorithms to keep its
users and the surrounding environment safe. This said it is
important to understand the Nano is not a toy and should be
operated with care and respect.
To Next Page
Loading...
