EasyManua.ls Logo

LOOP EV-Flex EVSE - Page 43

LOOP EV-Flex EVSE
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hide AP SSID: Options for hiding SSID of the Loop EV-Flex EVSE or not. This option is always o.
Connectivity: Species whether the Loop EV-Flex EVSE should always be connected to Internet using None,
Auto, Wi-Fi, or Cellular. Default value is Auto. When Network Mode is Direct, all option are available. If it is not, then
Connectivity will be set with the following rule:
Network Mode Group Use External Gateway = Yes Group Use External Gateway = No
Gateway WiFi Cellular
Client
WiFi
WiFi setting will be disabled and Client
will setup WiFi to connect to Gateway
indicated by “Gateway Serial Number”
WiFi
Active Device Status
Active Device: Current active network device. Possible value are None, Wi-Fi or Cellular.
Active IP Address: Current active IP address. There will be value here only if connected to a network.
Active Netmask: Current active netmask address. There will be value here only if connected to a network.
Active Gateway: Current active gateway IP address. There will be value here only if connected to a network and
network provide this data.
Active Primary DNS: Current active primary DNS IP address. There will be value here only if connected to a network
and network provide this data.
Active Secondary DNS: Current active secondary DNS IP address. There will be value here only if connected to a
network and network provide this data.
Note:
A Gateway charge point can choose using Wi-Fi or Cellular to connect to the internet by change “Group
Use External Gateway” setting. If set to Yes, a Gateway will use Cellular, or it will use Wi-Fi. When
changed this setting, the “Connectivity” option will automatically change as well. All charge point in
this Gateway/Client group must have the same “Group Use External Gateway” setting, i.e. all charge
points must set this option to Yes (including Gateway and Client) when we want to use an external Wi-Fi
AP to connect to internet. In this case, all charge points must also use the same Wi-Fi settings (SSID,
password) for the external Wi-Fi AP.
43
Loop EV-Flex
TM
EVSE
EVS-32A-L2-001 (R-Model)
v.20.9.4
www.evLoop.io

Related product manuals